CANopen

BB Electronics’ gateway converts Modbus ASCII or Modbus RTU serial signals into Modbus TCP Ethernet

BB Electronics’ MESP211 is a compact gateway designed to convert Modbus ASCII or Modbus RTU serial signals into Modbus TCP Ethernet.

Article source: http://www.controleng.com/single-article/modbus-gateway-devices-connect-to-ethernet/d72887c0b46dcacf2bf0a15dcfb574c5.html

By |January 6th, 2014|Industrial Networks|Comments Off on BB Electronics’ gateway converts Modbus ASCII or Modbus RTU serial signals into Modbus TCP Ethernet|

Moxa’s Profibus-to-fiber converters bridge Profibus to optical fiber

Moxa’s Profibus-to-fiber converters—the ICF-1280I and ICF-1180I—transparently bridge Profibus to optical fiber, providing total isolation, protection against EMI/RFI interference, and freedom from equipment grounding problems.

Article source: http://www.controleng.com/single-article/profibus-to-fiber-converters/ffcc7d2117f4532f2fc21578c2762ed4.html

By |January 6th, 2014|Industrial Networks|Comments Off on Moxa’s Profibus-to-fiber converters bridge Profibus to optical fiber|

Fieldbus Coupler for Profinet I/O Modules

Wago’s Profinet I/O Fieldbus Couplers 750 Series operate as I/O devices in the Profinet network.

Article source: http://www.controleng.com/single-article/fieldbus-coupler-series-for-profinet-network/9fa8d0cdc29e7a99d63caa8dc855843e.html

By |December 26th, 2013|Industrial Networks|Comments Off on Fieldbus Coupler for Profinet I/O Modules|

CAN-AIR/2 Wireless CAN Bridge

The CAN-AIR/2 is designed for bridging two different CAN networks via a radio link. It supports data exchange between CAN nets with two different baud rates. This stand-alone mode can be used e.g. to get access to CAN modules installed at turning machine parts or replacement of “slip rings” via a point-to-point connection.

By |November 26th, 2013|CAN I/O Series|Comments Off on CAN-AIR/2 Wireless CAN Bridge|